1J to 6J Pendulum Impact Test Apparatus
1J to 6J Pendulum Impact Test Apparatus
- Detail
- Parameters
Pendulum Impact Test Apparatus
1. Introduction
The pendulum impact test apparatus is designed according to IEC60309-1 figure A.1 to A. 7, for checking the mechanical strength of industrial plug and socket-outlets, appliance couplers and etc..
2. Specification
Pendulum release mode | Manual |
Number of working station | 1 |
Pendulum shaft | Length: 980mm (Designed according to figure A.5) A steel tube with Φ10mm in diameter and 1mm wall |
Pendulum shaft end | Designed according to figure A.3, made of steel |
Pendulum mass | Dimension: Φ50mm*16mm (Designed according to figure A.2) Quantity: 0.25KG*4 Material: steel |
Pendulum Anvil | Designed according to figure A.4, made of steel |
Pendulum Pivot | Designed according to figure A.6, made of aluminum |
Back and mounting plate | Designed according to figure A.7, made of 8mm steel |
Impact level | 1J | 2J | 3J | 4J | 5J | 6J |
Mass used | 0.5kg | 1kg | ||||
Impact angle | 250 | 350 | 360 | 420 | 470 | 520 |
Pendulum mass | 1.44kg | 1.93kg | ||||
Moment of inertia | 1.17kg.m2 | 1.61kg.m2 | ||||
Distance to gravity center | 0.776m | 0.833m | ||||
