Control mode

PLC control+touch screen interface

Test station

1

Application

Adjusting luminaire (like drawing board luminaires, shop-window spotlights, floodlighting luminaires)

Test driver

Servo motor

Twist angle

0-3600 adjustable (standard requirement: 1250 in both directions from the vertical)

Test frequency

1-10 times/min

Number of trials

0-999,999 cycles presetable (a cycle of operation is a movement from one extreme of the range to the other and back to the starting position, to make sure the rate of movement can reach 600 cycles/h)

Specimen adjustment

The fixture is manually clamped and adjusted up and down with AC motor, the maximum distance is 500mm

Maximum swing radius of the pendulum rod

R500mm, left and right of the platform, front and rear adjustment strokes are 0-500mm

Specimen clamping method

pressure plate and adjustable pressure block (three different fixtures can be distributed according to the sample base provided by the customer)

Test procedure

The touch screen can display bending angle, test cycles, number of trial

Alarm device

Flasher, auto stop

Dimension

1300mm*750mm*1600mm (L*W*H)

Working power

220V/50Hz