Non-Solid Pin Test Apparatus for Appliance Couplers

Non-Solid Pin Test Apparatus for Appliance Couplers

share
  • Detail
  • Parameters

Non-Solid Pin Test Apparatus for Appliance Couplers


1. Introduction

The non-solid pin test apparatus is designed according to IEC60320-1 figugre 2, for checking the mechanical strength of non-solid pins of appliance inlet / plug connector.   

A force of 100N is exerted on the pin which is supported on the apparatus, for 1min in a direction perpendicular to the axis of the pin, by mean of a steel rod have a diameter of 4.8mm, the axis of which is also at right angles to the axis of the pin . After the test, there shall be no significant alteration in the shape of the pin.


2. Specification


Steel rod

Φ4.8mm

Weights

100N

Usage

Manually rotate the hand wheel to make the pin bearing pressure, the test time is 1 min

Reference standards

IEC60320-1 figure 2, IEC60884-1 figure 14



non-solid-pin-test-device.jpg

Description
non-solid pin test apparatus  is designed according to IEC60320-1 figure 2, for checking the mechanical strength of non-solid pins of appliance coupler
Model
PG-NSP