IEC60335-1 Supply Cord Flexing Test Apparatus
IEC60335-1 Supply Cord Flexing Test Apparatus
- Detail
- Parameters
Power (supply) cord flexing test apparatus
1. Introduction
Power cord flexing test apparatus is designed according to IEC60335-1 clause 25.14 and figure 8, IEC60335-2-14 clause 25.14, IEC60884-1 clause 23.4 and figure 21, AS/NZS3112 clause 2.13.12.2 and figure 2.2, BS1363-1 clause 19.5 and figure 18. The flexing test is applied to the power cord of small appliance (like electric irons, coffee maker) and lumianire. The test is controlled by PLC and touch screen, the flexing angle and speed, test times can be adjusted. The power load is built-in the equipment.
2. Parameter
Working power | 220V/50Hz, 300W max |
Control system | 7 inch LCD touch screen+PLC |
Load weights | 5N, 10N |
Working station | 1 (customizable) |
Oscillating speed | 0-70r/min |
Oscillating drive | Step motor |
Test times | 0-99999 (preset-able) |
Oscillating angle | Free setting |
angle indicator | 0-3600, made of stainless steel |
Swing angle | ±1800 on both sides from vertical or any desired angle |
Output voltage (max) | 250V |
Output current (max) | 0-20A |
Output power (max) | 5KW |
Standard requirements | 1). IEC60335-1 clause 25.14 and figure 8 Test angle: 450 on both sides from the vertical line (900 a bend) Test times: 2000 Test speed: 60 r/min 2). IEC60335-2-14 clause 25.14 Test angle: 1800 Test times: 2000 Test speed: 6 r/min 3). IEC60601-1 clause 8.11.3. 6 Test angle: 450 on both sides from the vertical line (900 a bend) Test times: 2000 Test speed: 60 r/min 4). IEC60884-1 clause 23.4 figure 21 Test angle: 450 on both sides from the vertical line (900 a bend) Test times: 10000 Test speed: 60 r/min 5). AS/NZS3112 clause 2.13.12.2 and figure 2.2 Test angle: 450 on both sides from the vertical line (900 a bend) Test times: 10000 Test speed: 60 r/min 6). BS1361-1 clause 19.5, table 2 and figure 18 Test angle: 450 on both sides from the vertical line (900 a bend) Test times: 10000 Test speed: 60 r/min |
