IEC60068-2-31 Rotating Barrel
IEC60068-2-31 Rotating Barrel
- Detail
- Parameters
IEC60068-2-31 Tumbling Barrel
1. Introduction
The tumbling barrel is designed according to IEC60068-2-31 clause 5.3 / figure A.1, IEC60598-1 clause 4.13.5, IEC60884-1 clause 24.2 for repeat free fall test. The test is to check the mechanical strength of the electrical appliance like plugs and socket-outlets. The sample shall be placed in the tumbling barrel and subjected to prescribed number of falls.
2. Specification
Control units | Button control+meter/touch screen |
Test station | 1 |
Rotating speed | 5R/min |
Rate of fall | 10 falls/min |
Falling height | 500mm/1000mm |
Number of falls | 0-999999 (settable) Complete the prescribed number of falls, the equipment will auto stop |
Configuration | 1) Test surface: steel with thickness 3mm 2) Backed hardwood: plywood with thickness 15-20mm 3) Bevel: backed by 2 wedge-shaped chip-resistant rubber with a hardness of 80±20IRHD as per ISO48 |
Sizes | Width: 220mm Other sizes as below:
|
